[Hole Description: The plastic pieces fit 2mm axes; Through Hole refers to penetrate the plastic strip hole (aperture 2.05mm), not through the hole is a hole that did not penetrate the plastic strip (aperture 1.95mm);
The distance between adjacent holes all through is 10mm, through holes in the middle of the distribution of non-through holes:
(1) Plastic positive, adjacent through holes in the middle two holes impermeable, so the adjacent pitch is 3.333mm;
(2) plastic strip opposite, adjacent hole through the middle of a no through holes, so the adjacent pitch is 5mm;
(3) In addition to the above, the plastic strip left holes at each end of a 2.55mm for 2.5mm axle; For more details refer to the main map holes (put your mouse on the main image to enlarge to see details)
[Outline Specification]: 7mm * 7mm * 153mm
What others are saying
There are no contributions yet.