1pic ABS plastic toy bar linkage gearbox bracket axle frame diy model material white color

You can do the frame, frame deceleration device, build the model structure, the product can be truncated to use

[Hole Description: The plastic pieces fit 2mm axes; Through Hole refers to penetrate the plastic strip hole (aperture 2.05mm), not through the hole is a hole that did not penetrate the plastic strip (aperture 1.95mm);

The distance between adjacent holes all through is 10mm, through holes in the middle of the distribution of non-through holes:

(1) Plastic positive, adjacent through holes in the middle two holes impermeable, so the adjacent pitch is 3.333mm;

(2) plastic strip opposite, adjacent hole through the middle of a no through holes, so the adjacent pitch is 5mm;

(3) In addition to the above, the plastic strip left holes at each end of a 2.55mm for 2.5mm axle; For more details refer to the main map holes (put your mouse on the main image to enlarge to see details)

[Outline Specification]: 7mm * 7mm * 153mm