5dof five degree of freedom 3D printing robotic arm gripper sg90 servo robot science classroom SNAM3

https://img.xiaodingchui.com/2023/11/b8a52797be9212fff17d8ee9876a2cf4.mp4?_=1

Story Background

Ten years ago, I came into contact with the globally popular robotic arm arm, but the installation was particularly troublesome. It may take four hours to complete the entire installation, and most of my learning time was wasted on installation. That’s why I came up with the idea of developing a robotic arm that is easy to install. We use 3D printing technology, and the right angle part of the arm that needs to be tightened with screws is all integrated here, greatly reducing the overall installation time, and can even be installed in 30 minutes. This will allow more time for difficult programming and control studies. I hope my design can help more friends quickly learn robot knowledge.

Product Introduction:

This is a robotic arm produced using 3D printing technology, using 5 sg90 actuators, with a reasonable design, stable structure, and easy installation.

Size:

The maximum arm length is about 13cm

The maximum height is about 210cm

Product features:

3D printing production

5 sg90 servo motors

Simple and fast installation

Precautions:

1.3D printing production, there may be burrs, please be cautious if you mind

1. For loose shipments that require assembly, please be cautious when taking photos with poor hands-on skills

Shipping list:

1 set of 3D prints

5 sg90 servo motors