Brand new motor for bulk auto parts, this motor has double ball bearings at the front and rear, compensated carbon brushes, strong torque at DC12V, and can also be pressurized to DC24V, but 24V is relatively unsuitable for long-term work, small size, thick material , It is about the same size as the 395 motor, and it weighs more than 40 grams, and the weight reaches 142 grams. The feeling of holding it in the hand makes people feel at ease and reliable. The hand feels good, suitable for ship model, car model drive motor, or DIY hand-held grinding machine or drilling machine.
Motor applicable voltage: DC 12V-24V
Motor Diameter: 28MM
Motor height: 49.6 MM
Motor output shaft diameter: 2.3 MM
Output shaft length: 15MM
Voltage: DC12V
Current: 0.19 A
Speed : 7340 RPM
Voltage: DC14.4V
Current: 0.2 A
Speed : 8800 RPM
Note: The motor should not be suitable for long-term work at DC18V-24V, and it is relatively easy to heat up, and the shaft diameter of the motor is only 2.3MM, and I am worried that the torque is too large and the shaft can’t stand it.
Voltage: DC18V
Current: 0.22 A
Speed : 11000 RPM
Voltage: DC24V
Current: 0.25 A
Speed : 14700 RPM
Motor weight: 142 g
Power on the test machine, this motor is a double ball bearing, the ball bearing has high force strength, the sound is not as quiet as the copper sleeve, but the motor torque is strong, the power is very good when DC12V, if the pressure is above DC18V, really I am worried that the shaft of the motor will not be able to withstand it and break.
Note: This motor is small in size, high in torque, and high in power. The current of the power supply should preferably be more than 5A, the bigger the better. If the power and strength of the motor are small, it will not be able to play.
What others are saying
There are no contributions yet.