Blue Black TINY85 Digispark Kickstarter Micro Development Board ATTINY85 module for Arduino IIC I2C USB

ATTINY85 module Black:

1. Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
2. Power via USB or External Source or 7-16 v to 5 v (automatic selection).
3. The On – board, 150 ma 5 v Regulator.
4. Built – in USB and serial was debugging).
5. 6 I/O Pins (2 are informs the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
6. 8 k Flash Memory (about 6 k after bootloader).
7. The I2C and SPI (vis USI).
8. PWM on 3 pins (more possible with Software PWM).
9. The ADC on 4 pins.
10. The Power LED and the Test/Status leds.
The Specs:

1. Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
2. Power via USB or External Source – 5v or 7-16v (automatic selection).
3. On-board 150ma 5V Regulator.
4. Built-in USB (and serial debugging).
5. 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
6. 8k Flash Memory (about 6k after bootloader).
7. I2C and SPI (vis USI).
8. PWM on 3 pins (more possible with Software PWM).
9. ADC on 4 pins.

ATTINY85 module Blue

1. Support for the Arduino IDE 1.0+ (OSX/Win/Linux).

1. Power via USB or External Source – 5v or 7-16v (automatic selection).
2. On-board 150ma 5V Regulator.
3. Built-in USB (and serial debugging).
4. 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
5. 8k Flash Memory (about 6k after bootloader).
6. I2C and SPI (vis USI).
7. PWM on 3 pins (more possible with Software PWM).
8. ADC on 4 pins.
9. Power LED and Test/Status LED