-10%

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

Availability:

265 in stock

Sales 20

$5.26$21.13

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

About Module UART 125KHz

1.Description:

7941E card reader module, integrated high performance card reading radio frequency circuit and antenna and users can select wiegand or UART interface. Rich application support, it supports various cards card reading operation

2.Features:

1>. Voltage: DC 5V

2>. Current: 40mA

3>. Support 125KHz card reading

4>. Interface: Wiegand, UART

5>. Size: 47*26*5mm

6>. Operating Temperature: -20~70 Celsius

7>. EM4100 Card Reading Distance: >8cm

3.Connection Introduction:

1>.Power: DC 5V power supply, choose linearity power can gain better effects

2>.D1 D0: wiegand data output DATA1, DATA0

3>.FOR: format selection (hanging means W26, ground connection means W34)

4. Wirgand Interface Output Introduction:

1>.When it sensors the card, the serial number will be output via Data 0, Data 1 two data wire

2>.Data 0 and Data 1 are high level when there is no data output

3>.Data Bit 0: it will generate 400us low level on Data 0 wire

4>.Data Bit 1: it will generate 400us low level on Data 1 wire

5>.Every data length is 2400us

6>.Every Mifare card has a serial number with 4 bytes, users should output the last three bytes

7>.Add the first 12-bit even check bit in the front and add the last 12-bit odd check bit in the back, 26-bit data in total

8>.Card number is 6B 3D 12 D6

9>.Output data is 3D 12 D6

10>.Weigand 26 Code

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

About Module Wiegand 13.56MHz 125KHz:

1.Description:

7304D entrance guard card reader, it has brief appearance. It built-in 13.56MHz and 125KHz dual frequency card reading function, supports ISO14443A card and EM4100 card reading operation

2.Features:

1>. Power: DC 5-15V

2>. Operating Current: max<100mA

3>. Operating Frequency: 13.56MHz+/-5KHz; 125KHz

4>. Support common ISO14443A protocol

5>. Support EM4100 and its compatible card

6>. Card Reading Distance: IC>5cm; ID>5cm

7>. 1 channel Wiegand data output port, support WG26, WG34 multiple format to choose

8>. Card sensor speed is lower than 100ms

9>. 1 channel LED control input

10>. 1 channel BUZ control input

11>. Size 74*115*16mm

12>. Operating Temperature: -20~60 Celsius

13>. Operating Humidity: 10%-95%

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

About Module UART 13.56MHz 125KHz:

1.Description:

7941W is a multi-protocol dual-band read and write module.set IC and ID read and write one.It can read a variety of IC and ID card.Support Mifare1K,UID card,IC card,T5577 ID card.

2.Features:

1>.Voltage: DC 5V

2>.Current: 50mA

3>.Distance: Mifare>3cm; EM>5cm

4>.Size: 47mmX26mmX5mm

5>.Interface: UART, Wiegand

6>.Support Chips: ISO/IEC 14443 A/MIFARE, NTAG, MF1xxS20, MF1xxS70, MF1xxS50

7>. EM4100, T5577 read and write function

8>.Operating Temperature: -25~85 Celsius

3.Connection Introduction:

1>.5V: DC 5V power supply pin; if you use linearity power, it will gain better effects

2>.RX: receive pin

3>.TX: transmit pin

4>.GND: power supply ground pin

5>.IO: definition

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

DC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For ArduinoDC 5V RFID Reader Wireless Module UART 3Pin 125KHz 13.56MHz Card Reading EM4100 for IC Card PCB Attenna Sensor Kits For Arduino

SKU: 33016873869 Category:

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Continue as a Guest

Don't have an account? Sign Up

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.