<strong><span style="font-size: 20px"><span><span>About the DIY Smart Plug Module</span></span></span></strong>
Appearance and Parameters
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H5632185a665f459f93d06424decd0280h.png" /><img src="//ae01.alicdn.com/kf/H1ac6c44e979b4209a6dcb39e4e1d7a7d7.png" /></span></span>
Parameter |
Description |
Input voltage |
12V |
Output DC voltage range |
28V-30V |
Output DC current |
10A |
Output AC voltage range |
125V-250V |
Output alternating current |
10A |
Size |
L:60mm W:57mm H:14mm |
Wight |
38.5g |
Interface introduction
Interface |
Description |
COM1 |
public |
NC1 |
Normally closed end, the relay is shorted to COM1 before the suction is closed, and it is suspended after being sucked |
NO1 |
Normally open, the relay is suspended before it is sucked, and it is short-circuited with COM1 after suction. |
COM2 |
public |
NC2 |
Normally closed end, the relay is shorted to COM2 before the suction is closed, and it is suspended after being sucked |
NO2 |
Normally open, the relay is suspended before it is sucked, and it is short-circuited with COM2 after suction. |
COM3 |
public |
NC3 |
Normally closed end, the relay is shorted to COM3 before the suction is closed, and it is suspended after being sucked |
NO3 |
Normally open, the relay is suspended before it is sucked, and it is short-circuited with COM3 after suction. |
COM4 |
public |
NC4 |
Normally closed end, the relay is shorted to COM4 before the suction is closed, and it is suspended after being sucked |
NO4 |
Normally open, the relay is suspended before it is sucked, and it is short-circuited with COM4 after suction. |
<span><span style="font-size: 16px"><strong>Indicator description:</strong></span></span>
<span><span style="font-size: 16px">LED D1/D2/D3/D4 (red light): relay work indicator, light up when turned on</span></span>
<span><span style="font-size: 16px">LED D7 (red light): mode 1 indicator</span></span>
<span><span style="font-size: 16px">LED D5 (blue light): mode two indicator</span></span>
<span><span style="font-size: 16px">LED D6 (green light): The working status indicator is described as follows:</span></span>
<span><span style="font-size: 16px">(1) When it is off, it means that it is self-configuring or losing connection with the route.</span></span>
<span><span style="font-size: 16px">(2) When the 0.5S flashes, the wifi module is configuring the wif account and password.</span></span>
<span><span style="font-size: 16px">(3) 2S slow flashing means the configuration is completed, and the connection with the mobile phone is started.</span></span>
<span><span style="font-size: 16px">(4) Chang Liang represents the completion of the connection</span></span>
<span><strong><span style="font-size: 20px"><span>Note: </span></span></strong></span>
<img src="//ae01.alicdn.com/kf/H8b2864e5cf25496586875dba30016cd6E.jpg" />
<span><span style="font-size: 16px"><strong>Jumper cap instructions:</strong></span></span>
<span><span style="font-size: 16px">Reserve two jumper caps: Please insert more than one end in normal use (ie RX is connected to RX1, TX is connected to TX1). If you want to use the USB to TTL serial port module to debug ESP-01 module separately, please insert it to the top (otherwise There may be interference).</span></span>
About the ESP Flasher CP2104 Programming ESP8266/ESP32 Module for Arduino
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>A CP2104 3.3V USBToUART converter support 400mA+ current. Program ESP8266/ESP32 module just like NodeMCU. It has smaller size than rev2 and we make it breadboard friendly. You can also use the flasher to programming ESP32 without pushing flash button.</span></span></span>
<span style="max-width: 100%;font-weight: 700 !important"><span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>Product Description</span></span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>Change For Rev4</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Replace CP2102 to CP2104</span></span></span>
· It can support ESP32 now
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Breadboard friendly</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Smaller size</span></span></span>
<span style="max-width: 100%;font-weight: 700 !important"><span><span style="max-width: 100%">What is it?</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>A CP2104 3.3V USBToUART converter support 400mA+ current. Program ESP8266/ESP32 module just like NodeMCU. It has smaller size than rev2 and we make it breadboard friendly. You can also use the flasher to programming ESP32 without pushing flash button.</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span><img src="//ae01.alicdn.com/kf/H2dc3afc25f0e49c59adac5ce3cff3b4eA.jpg" style="border-style: none;vertical-align: middle;max-width: 100%" /></span></span></span>
<span style="max-width: 100%;font-weight: 700 !important"><span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span><span style="max-width: 100%">Why did you make it?</span></span></span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>The converter supports 400mA+ current. It’s good for programming ESP8266 and ESP32 module</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>For program with Arduino IDE, the circuit does the trick for auto reset. Thanks for NodeMCU team!</span></span></span>
<span style="max-width: 100%;font-weight: 700 !important"><span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span><span style="max-width: 100%">Features</span></span></span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Based on CP2104</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· ESP8266 and ESP32 supported</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Breadboard friendly</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· A Reset button and a flash button</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· No need press reset button when programming esp8266 / esp32 with Arduino IDE</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Operating voltage:3.3V</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· System support:Windows 98SE/2000/XP/Vista/Window7/Mac OS 9/Mac OS X/Linux 2.40</span></span></span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Output current:400mA+ (a MIC5219 LDO) </span></span></span>
<span>7/Mac OS 9/Mac OS X/Linux 2.40</span>
<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%"><span>· Output current:400mA+ (a MIC5219 LDO) </span></span></span>
How to use
<span><span style="font-size: 16px">The default mode of the device is homekit.</span></span>
<span><span style="font-size: 16px">HomeKit (ONLY for Apple users):</span></span>
<span><span style="font-size: 16px">Step 1: Please open the WLAN setting page of your iPhone (as Fig. 1), find and connect the WiFi hotspot named as Homekit_xxxx. After about 3s, WiFi configuration interface will pop up automatically.</span></span>
<span><span style="font-size: 16px">Note: If the interface doesn’t pop up automatically, please open your phone browser and input //192.168.4.1. And then, please wait for entering the interface of configuration.</span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/Heed3cf4b88ee4106bce79ebfcd942623x.png" /></span></span>
<span><span style="font-size: 16px">Fig.1 Connect your iPhone or iPad to the new wifi network Homekit_xxxx hotspot</span></span>
<span><span style="font-size: 16px">Step 2: Wait for the Captive Portal and select your WiFi network in the pop-up window, and insert your password and click “join” (as Fig. 2). Please make sure that the indicator always lights (the WiFi account information in the pictures is only for reference).</span></span>
<span><span style="font-size: 16px">Note: If you don't find your router or smart plug at other states. Please look over the Frequent Problems and reconfigure the smart socket.</span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H7016a540bc044babaed40ad38d1055f8z.png" /><img src="//ae01.alicdn.com/kf/He080a89a87a14397988934fb173c3160n.png" /></span></span>
<span><span style="font-size: 16px">Fig. 2 Wait for the Captive Portal and select your WiFi network</span></span>
<span><span style="font-size: 16px">Step 3: Please check if you have installed Home APP.</span></span>
<span><span style="font-size: 16px">If not, please download it in the App Store. (as Fig. 3). If it is already installed, go to step 4.</span></span>
<span><span style="font-size: 16px">Fig. 3 Download the Home App</span></span>
<span><span style="font-size: 16px">Step 4: Please connect your phone with your home WiFi network (as Fig. 4)</span></span>
<span><span style="font-size: 16px">Note: Please ensure that the IPhone and the smart plug are in the same network.</span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H0b60ca7f9863432eb9658582f45d17ccZ.png" /></span></span>
<span><span style="font-size: 16px">Fig. 4 Connect your phone with your home WiFi network</span></span>
<span><span style="font-size: 16px">Step 5:</span></span>
<span><span style="font-size: 16px">1)Open the Home app</span></span>
<span><span style="font-size: 16px"> 2)Click the + symbol</span></span>
<span><span style="font-size: 16px"> 3)Click I don't have the code..</span></span>
<span><span style="font-size: 16px"> 4) Select the Switch-xxx. When the Switch-xxx does not appear on top of the page, if you have a dual-band router, please turn off the 5GHZ Wi-Fi network and ensure that yu are using 2.4GHz Wi-Fi network.</span></span>
<span><span style="font-size: 16px"> 5)Confirm that you want to add the device</span></span>
<span><span style="font-size: 16px"> 6)Insert the Password that is 12345678</span></span>
<span><span style="font-size: 16px"> 7) After waiting for the encryption check (about 30s-50s), you have added the switch successfully. Please rename the smart device for convenient operation in the later, and enjoy it.</span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/Hddaf9a009dce47499d2f6adecd70b2a0T.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H788c3c2a775e43feb0a992edaa442896u.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H419fd1a86369497d901a68dea2bde0a5J.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H8ed66792f68545c991482fce887ee54b8.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/Ha55f9f767cb04589a0bdaf7f058bc89c3.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H1f63892451a847e3b7aa98aa88c5f7885.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/He373b013bb194420bcd4775d80be98a4I.png" /></span></span>
<span><span style="font-size: 16px"><img src="//ae01.alicdn.com/kf/H1088c93eb32c41e6a64124280a5dc136q.png" /></span></span>
<span><span style="font-size: 16px">Fig. 4 How to Pair HomeKit</span></span>
Frequent Problems:
<span><span style="font-size: 16px">Q1: How to reset the socket to the factory mode?</span></span>
<span><span style="font-size: 16px">A: Switch three times (power off three times) can be restored to factory mode.</span></span>
R***a –
Пришло в Сочи за 19 дней. Соответствует описанию
(0) (0) Watch Unwatch
T***i –
Отлично!
(0) (0) Watch Unwatch