Robot gripper accessories with motor robot arm gripper Arduino mechanical gripper
The clip is sent out after installation and debugging, and the mechanical claw is driven by a single motor.
The clip body is made of stainless steel, and the control is simple. It is connected to a DC power supply with a voltage of 5 to 15 volts, red is connected to negative, and black is connected to positive. The clip tightens. Otherwise loosen.
At 12 volts, the clamping force can reach about 16KG, and the clip can be self-locked after the power is turned off, and the tightened items will not loosen.
The maximum driving current of the clip is about 1.2A. When the clip is tightened, the built-in protection device of the motor starts, cuts off the power and stops the power supply, and the clamping force is maintained. After the voltage returns to zero, the power supply is reversed and the clamp is released.
The clip weighs 396 grams.