Track chassis tank intelligent diy climbing car robot toy 3D printing upgrade accessories TT motor version

Sales 0

$29.00

The chassis uses tt motor, the length, width and height are about 20*17*5cm, and the weight is about 460g
Purchase Notes

1: Most of this model is printed by FDM 3D printer, so the model will have layers, micro-cracks, deformation and other situations can not be avoided! Those who mind, please buy carefully!

2: Suitable for people over 14 years old (not children’s toys), the model is fragile, do not play with violence!

Three: Do not place it in an environment with a temperature above 50 degrees for a long time, it will cause softening and deformation.

Shipping Precautions

1. There is only one chassis in the delivered package and no other information.

2. Only the chassis is delivered, and other accessories such as remote control and power supply need to be purchased separately. If you do not understand this aspect, please purchase with caution! ! !

parameter

1. Voltage: within 9V (7v is the most suitable).

2. The chassis uses two tt motors, each of which only controls the forward and reverse rotation of the track on a separate side. Therefore, at least four-channel remote control is required.

SKU: SN11008 Category:
Weight0.55 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Track chassis tank intelligent diy climbing car robot toy 3D printing upgrade accessories TT motor version”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.