Electronic version of two-channel wired remote control board Controllable one motor forward and reverse
Product Name: Two-way board
Product size: 20*30mm
Supply voltage: 3-6V, can not exceed 6V! ! !
Power requirements: Only dry batteries can be used, but high-energy dry batteries cannot be used. The battery of the domestic big brand is not good either, and the lithium battery cannot be used.
Wire: The power cord is about 5.5 cm long and the motor cable is about 11.5 cm long.
Uses: A small motor, after wiring, then its direction of rotation is fixed. If you need to change the direction of rotation, you must reverse the positive and negative poles of the power supply, but if you have this cost-effective remote control module, you only need to press different The button can be used to switch the motor forward and reverse. If you press the left button and the motor rotates counterclockwise, then when you press the right button, the motor will rotate clockwise.
Note:
Strictly use the corresponding battery power according to the rated voltage, check the power output, and the battery output voltage is insufficient, which will cause the function of the board to be lost. It is strictly forbidden to avoid using high-energy batteries, otherwise it is easy to burn!
This type is suitable for models such as toy boats and toy cars. It cannot be used as an airplane remote control! Therefore, you cannot use the model battery!
Please use the ordinary 5th battery, can not use high-energy batteries such as Nanfu battery!
Admin victor –
so cheap
(0) (0) Watch Unwatch