2.4Ghz 6CH RC high-power tank robot remote control Radio 12v DIY

SINONING

$22.90 
SKU: SNRM23

2.4Ghz 6CH RC high-power tank robot remote control Radio 12v DIY

Features:

* 4-channel high-power, 2-channel low power, you can control two high-power motor, a small power 130 small motor
* Relay switch module control high-power motor, safe unlimited
* 2 high-power motor, acceptable 1-12V, the current maximum acceptable 10A
* 2.4G remote control distance greater than 30 meters
* Remote control about 2 rocker, suitable for left and right drive the car or boat, tanks, tracked vehicles, crawler robots, etc.
* Remote control circuit is powered separately and stable.
 
principle:
Through the 2.4G remote control issued a high level, control high-power 220V 10A relay switch connection and disconnect, for high-power appliances, safe, stable and durable. With three holes in the board, plus plastic column installation, durable. Wiring using the press terminal, easy to use, easy to re-use. Relay lines are very complex, we have completed the production of engineers, hand can be used.
 
Product parameters:
Remote control frequency: 2.4G
Number of channels: 4 high power, for 2 high power motor, 2 low power for one low power motor
Size: length, width, height 90 * 75 * 90 mm
weight:279g
 
High power principle: relay switch type
 
Two-way power supply:
Remote control circuit: 4 AA batteries
High power input: 1-12V, maximum 10A
 
Precautions:
* Relay line connection is complex, most people are difficult to complete,  need to be careful line off
* High power means that the large voltage, large voltage is a big risk, this product allows the maximum voltage of 12V, not allowed to modify the product at will
* After starting the circuit, 10 seconds without any operation, the circuit will enter the automatic demonstration function
* This product is developed by the company's own technical staff, does not allow any company or individual copy
 
Instructions:
1, put 4pcs AA battery, switch on the battery box
2, remote control into the battery, close to the receiver board, press on / off, the module will start ,four lights will  turn on.
3, move the rocker, or 10 seconds after the remote control will enter the self-demonstration state