50pcs L-shaped miniature building model consumables manual four-wheel drive axle frame iron sheet DIY model

SINONING

$1.00 
SKU: 50B30

A very little small L-shaped angle iron, angle iron miniature, building model can do the sheet metal piece is fixed; toys axle carrier can also be done, as shown in the video page usage (2mm axle aperture for iron, Large hole iron pieces are suitable for 2.5 and 3mm axles).

(The difference between the large hole and the small hole angle iron is that the 2.5mm and 3mm holes are replaced by 2mm holes respectively)

 

Small hole iron piece: thickness 0.6mm, bottom area 5.5*9mm, height 10mm, bottom hole 2 holes 2mm aperture, 2 holes on the side upper and lower holes 2mm;

 

Large hole iron piece: thickness 0.6mm, bottom area 5.5*9mm, height 10mm, hole 2 hole 2mm hole diameter, hole 2 holes upper and lower holes 3mm (bottom), 2.5mm (top)

 

Shipping list: 50pcs