Control Board for 18DoF Biped Robotic Humanoid Robot Educational Robot DIY RC Toy


SKU: 8518738

  • Fully compatible with the original wifi transmission module electrical interface and physical interface;
  • The robot firmware is reliable and stable, supports WEB interface configuration download, graphic action download programming;
  • Based on esp-f high performance WiFi module, the overall size: 24mm*16mm*3mm;
  • Power supply voltage: 4.5 V ~ 6.4 V, TTL voltage: 3.3 V;
  • Lead pin: 3.3 V, TXD, RXD, GND;
  • Average current: 80mA; the maximum operating current when sending the wifi data: 3000mA;
  • Support serial AT instruction;
  • Support reprogrammable, OTA firmware upgrade;
  • Real-time seamless transmission of serial port and WiFi data;
  • Built-in HTTP Web Server, supporting the Web page configuration of various parameters;
  • WiFi supports three modes: AP, STA, AP + STA;
  • Support the WiFi STA mode to reconnect, the TCP Client mode to reconnect;
  • Serial port support to set baud rate, data bit, parity check, stop bit, subcontract time;
  • Support baud rate (BPS): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/
  • 230400/460800/921600/1843200/3686400;
  • Operating temperature range: - 40 ℃ - 125 ℃;